Wearable Mobile LiDAR Applications and Evaluation of Measurement Accuracy
Keywords:
Simultaneous localisation and mapping, Trajectory estimation, Georeferencing, Uncertainty propagation, Independent validationAbstract
Wearable mobile light detection and ranging systems enable continuous three dimensional mapping while an operator walks through buildings, infrastructure and natural environments. Their practical value depends on the reliability of the complete measurement chain rather than point density alone. This technical article explains laser ranging, inertial sensing, trajectory estimation, loop closure, georeferencing and point cloud processing, and develops a reproducible framework for evaluating their combined effects. The framework separates local surface precision, trajectory consistency, absolute positional accuracy and the accuracy of derived dimensions and models. Independent checkpoints, repeated trajectories, reference surfaces and application specific completeness tests are assigned complementary roles. Analytical sensitivity calculations show why orientation and timing errors can outweigh nominal range uncertainty, while worked examples demonstrate how residual statistics and change detection thresholds should be interpreted. All numerical examples are illustrative calculations rather than field observations. Applications in heritage documentation, structural measurement, underground mapping and coastal surveys are translated into acquisition and validation requirements. The resulting procedure supports defensible acceptance decisions by linking each deliverable to a defined tolerance, independent evidence and an explicit uncertainty statement.
References
[1] Yakar, M., & Karabacak, A. (2023). Giyilebilir mobil LiDAR ve uygulamaları. Atlas Akademi.
[2] Zhang, J., & Singh, S. (2014). LOAM: Lidar odometry and mapping in real-time. In Proceedings of Robotics: Science and Systems. https://doi.org/10.15607/RSS.2014.X.007
[3] Di Filippo, A., Sánchez-Aparicio, L. J., Barba, S., Martín-Jiménez, J. A., Mora, R., & González-Aguilera, D. (2018). Use of a wearable mobile laser system in seamless indoor 3D mapping of a complex historical site. Remote Sensing, 10(12), 1897. https://doi.org/10.3390/rs10121897
[4] Karabacak, A., & Yakar, M. (2023). Incorrect use of wearable mobile LiDAR: Example of Mersin Soli Beach and Ankara National Library underpass. Intercontinental Geoinformation Days, 7, 234–237.
[5] Yildiz, F., Karabork, H., Yakar, M., Altuntas, C., Karasaka, L., & Goktepe, A. (2007). 3D modelling by advanced total station. In Proceedings of the XXI International CIPA Symposium. Athens, Greece.
[6] Büyükmıhçı, G., Akşehirlioğlu, A., & Koca, M. (2023). Advantages and disadvantages of laser scanning with ViDoc RTK antenna: Ali Cafer Kümbeti. Advanced LiDAR, 3(2), 41–46.
[7] Mohamed, M., Morsy, S., & El-Shazly, A. (2022). Evaluation of machine learning classifiers for 3D mobile LiDAR point cloud classification using different neighborhood search methods. Advanced LiDAR, 2(1), 1–9.
[8] Kuçak, R. A. (2022). The feature extraction from point clouds using geometric features and RANSAC algorithm. Advanced LiDAR, 2(1), 15–20.
[9] Kuçak, R. A., & Büyüksalih, İ. (2023). Comparison of CSF ground filtering method by using airborne LiDAR data. Advanced LiDAR, 3(2), 47–52.
[10] Sarıtaş, B., & Kaplan, G. (2023). Enhancing ground point extraction in airborne LiDAR point cloud data using the CSF filter algorithm. Advanced LiDAR, 3(2), 53–61.
[11] Sarıtaş, B., & Kaplan, G. (2024). Comprehensive study on enhanced accuracy analysis of LiDAR data: The example of Skopje. Advanced LiDAR, 4(1), 9–18.
[12] Güleç Korumaz, S. A., & Sayar, R. (2022). Deviation analysis of historical building based on terrestrial laser scanner data and 3D mesh model. Advanced LiDAR, 2(1), 21–30.
[13] Özeren, Ö., & Korumaz, M. (2021). LiDAR to HBIM for analysis of historical buildings. Advanced LiDAR, 1(1), 27–31.
[14] Lague, D., Brodu, N., & Leroux, J. (2013). Accurate 3D comparison of complex topography with terrestrial laser scanner: Application to the Rangitikei canyon (N-Z). ISPRS Journal of Photogrammetry and Remote Sensing, 82, 10–26. https://doi.org/10.1016/j.isprsjprs.2013.04.009
[15] Karabork, H., Yildiz, F., Yakar, M., Altuntas, C., & Karasaka, L. (2007). Modeling and visualization using laser scanner in documentation of cultural heritage. In Proceedings of the XXI International CIPA Symposium. Athens, Greece.
[16] Göktepe, A., Karabork, H., Yakar, M., Yildiz, F., & Baygul, E. (2009). 3D modeling of Sille Aya-i Eleni Church with laser technology. In Proceedings of the 22nd CIPA Symposium. Kyoto, Japan.
[17] Çelik, M. Ö., Alptekin, A., & Yakar, M. (2019). Modelling of the mausoleum in Kanlidivane ruins with terrestrial laser scanner. In Proceedings of the 2nd International Mersin Symposium (Vol. 1, pp. 23–25).
[18] Kanun, E., Metin, A., & Yakar, M. (2021). Yersel lazer tarama tekniği kullanarak Ağzıkara Han’ın 3 boyutlu nokta bulutunun elde edilmesi. Türkiye LiDAR Dergisi, 3(2), 58–64.
[19] Güleç Korumaz, A. G., Korumaz, M., Dülgerler, O. N., Karasaka, L., Yıldız, F., & Yakar, M. (2010). Evaluation of laser scanner performance in documentation of historical and architectural ruins, a case study in Konya. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, XXXVIII(Part 5), 361–366.
[20] Koca, M., & Kozlu, H. H. (2021). Advantages and disadvantages of using TLS techniques in monumental buildings; Darsiyak Yanartaş Monastery Archangel Michael and Gabriel Church example. Advanced LiDAR, 1(1), 1–5.
[21] Albayrak, M., & Büyükmıhcı, G. (2021). Survey process of Gesi pigeonry with ground laser by (point cloud) scanning method. Advanced LiDAR, 1(1), 6–17.
[22] Kaderli, L. (2021). Documentation methods from tradition to the present: Case study Cappadocia. Advanced LiDAR, 1(1), 18–26.
[23] Güleç Korumaz, S. A. (2021). Terrestrial laser scanning with potentials and limitations for archaeological documentation: A case study of the Çatalhöyük. Advanced LiDAR, 1(1), 32–38.
[24] Sarıtaş, B., Aydar, U., & Karademir, B. (2023). The use of terrestrial laser scanning technology in the documentation of cultural heritage: The case of Bezmialem Valide Sultan Fountain. Advanced LiDAR, 3(2), 62–69.
[25] Karataş, L., Alptekin, A., & Yakar, M. (2023). Investigating the material deteriorations on the facades of stone structures by terrestrial laser scanning method: Case study of Mardin mansion. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 23(3), 700–711. https://doi.org/10.35414/akufemubid.1197891
[26] Alyilmaz, C., Alyilmaz, S., & Yakar, M. (2010). Measurement of petroglyhps (rock of arts) of Qobustan with close range photogrammetry. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, XXXVIII(Part 5), 29–32.
[27] Dörtbudak, E. B., & Akça, Ş. (2024). Comparing photogrammetry and smartphone LiDAR for 3D documentation: Kızılkoyun Necropolis case study. Advanced LiDAR, 4(1), 19–27.
[28] Aslan, İ., & Polat, N. (2022). Availability of iPhone 13 Pro laser data in 3D modeling. Advanced LiDAR, 2(1), 10–14.
[29] Kanun, E., Alptekin, A., & Yakar, M. (2021). 3D ship modeling with laser scanning method. In Proceedings of the International Symposium on Applied Geoinformatics (pp. 2–3). Riga, Latvia. https://doi.org/10.15659/isag2021.12314
[30] Alptekin, A., Çelik, M. Ö., & Yakar, M. (2019). Modelling of a sea cliff with terrestrial laser scanning. In Proceedings of the International Symposium on Applied Geoinformatics (pp. 199–202).
[31] Yazıcıoğlu, Ş. A., Öztürk, K. F., & Günen, M. A. (2023). Analysis of Gümüşhane-Trabzon highway slope static and dynamic behavior using point cloud data. Advanced LiDAR, 3(2), 70–75.
[32] Yilmaz, H. M., Yakar, M., Yildiz, F., Karabork, H., Kavurmaci, M. M., Mutluoglu, O., & Goktepe, A. (2010). Determining rates of erosion of an earth pillar by terrestrial laser scanning. The Arabian Journal for Science and Engineering, 35(2A), 163–172.
[33] Özdemir, İ., & Güngör, A. (2024). Documentation of archaeological excavation sites with terrestrial laser scanning and UAV photogrammetry methods. Advanced LiDAR, 4(1), 28–32.
[34] Promneewat, K., & Taksavasu, T. (2024). Performance of affordable 2D cave scanning technique from LiDAR for constructing 3D cave models. Advanced LiDAR, 4(1), 1–8.
[35] Yakar, M., Yılmaz, H. M., & Mutluoğlu, Ö. (2008). Lazer tarama teknolojisi ve fotogrametrik yöntem ile hacim hesabı [Research project report, Project No. 105M179]. TÜBİTAK.

