The effect of a polygon route that is not stretched on the investigation of a rough incorrectly measured angle and edge
Keywords:
Polygon route, Rough faulty edge, Rough faulty angle, Stretched shape of polygon routeAbstract
When a traverse net is in a tense position, the angles measured between the directions observed at the traverse points are close to 200g. If the angles measured between the directions observed at the traverse points are around 100g or 300g, this indicates that the net is not in a tight manner. In both the Large-Scale Map and Map Information Production Regulation and the 1/2500 Large Scale Map Production Regulation, which was abolished, the traverse nets created must be stretched. In the event that the net is disturbed for compulsory reasons, there is no problem in the coordinate calculation of the traverse unless a rough error is made in the size of the edge and angle. However, if a rough error is made in the angle or edge dimension on a non-taut traverse net, is it possible to determine the point where the rough faulty edge or rough faulty angle is measured with the taught rules? Whether this is possible or not was investigated in this study. In this study, theoretical information on the subject has been given and practical studies have been done. Findings and opinions obtained as a result of the study are stated.
References
1. Brönnimann, (1888). Study on The Gross Error Angles of Traverse Calculations (in German: Auffinfung eines groben Winkelfehlers in einem Polygonzug) Zfv. p.524
2. Hamacher, W. (1963). Study on The Error Point of The Gross Error Angels of The Traverse Calculation (in German: Das Auffinden des Fehlerpunktes bei einem groben Winkelfehler im Polygonzug), Zfv, Nr, 3/1963, p.130-132
3. İnce, H. (1999). The Proposals in The Researching by Calculation Method of The Length Which Has Gross Error on The Dependent Traverse and Series Triangulation (in Turkish: Bağlı Poligon Ve Dizi Nirengide Kaba Hatalı Kenarın Hesap Metoduyla Araştırılmasında Öneriler), K.T.Ü. Faculty of Engineering Architecture, Faculty Press No: 24, Trabzon, Turkey
4. Koç, İ. (1986). The Determination of Gross Error Angles by Single Calculation Method on The Traverse (in Turkish: Poligon Geçkilerinde Kaba Açı Hatasının Tek Yönlü Hesapla Bulunması), Bulletin of Chamber of Surveying Engineers, No:56-57, Ankara, Turkey
5. Pektekin, A. (1978). Calculating the Coordinates of a Traverse by Computers and Searching of Gross Error Angle and Length (in Turkish: Poligon Hesaplarının Bilgisayarlar İle Yapılması Kaba Kenar Ve Açı Hatalarının Araştırılması), Y.T.Ü. Text Nots / Monografiler, İstanbul, Turkey
6. Pinkwart, (1941). Study on The Gross Error Angles of The Conecting Traverse Calculations (in German: Die Auffindung eines groben Winkelfehlers im Polygon- zug ohne Abschlurichtung.) Zfv. p. 227
7. Rennebach, (1941). The Determination of Gross Error Angles and Error Points in The Traverse Calculation (in German: Ermittlung eines groben Winkelfehlers und des Fehlerpunktes im Streckenzuge (Polygonzuge) ohne Abschlurichtung). Zfv, p.81
8. Kissam, P. (1966). Surveying Practice the Fundamentails Of Surveying, McGraw- Hill, New York
9. Allan, A. L., Hollwey, J. R., Maynes, J. H. B. (1968). Pratical Field Surveying and Computations, Heinnemann, London
10. Uren, J., Price, W.F. (1986). Surveying for Engineers, Second Edition, ELBS Macmillan, London
11. Kahmen, H., Faig W. (1988). Surveying, de Grayter Berlin-Newyork, ISBN 3-11-008303-5, p.259-271
12. Bannister, A., Raymond, S., Backer, R. (1992). Surveying, John Willey & Sons. Inc. 605 third Avenue, New York, p.201-206
13. Muskett, J. (1995). Site Surveying, Second Edition,Blackwell Science Ltd. Oxford ISBN 0-632-3848-9, p.100-113
14. Kavanagh, B. F. (1997). Surveying with Construction Application, 3rd Edition, Prentice Hall, USA, New Jersey, ISBN 0-13- 449679-5, p. 165-169
15. Kavanagh, B. F., Bird, S. J. G. (2000). Surveying Principles and Applications, Upper Saddle River, New Jersey 07458
16. Kavanagh, B. F. (2003). Geomatics, Peaerson Education İnc. New Jersey 2003, p.156-160
17. Wolf, P. R., and Ghilani, C. D. (2008). Elementary Surveying an Introduction to Geomatics. 12th Edition, Upper Saddle River, New Jersey: Pearson Prentice-Hall. pp. 233-269
